## Resources - https://youtu.be/LxdCzfF77t4 - https://en.wikipedia.org/wiki/HP_Integrated_Lights-Out ## Using iLO ### From scratch - enter iLO menu with `F8` after POST - in the `[file]` option there is a reset to default settings - as long as the above points are handled then you can get a new `DHCP` DORA process going so that you can use intelligent provisioning via `F10` to boot from an `.iso` on the remote machine. - **NOTE:** to use the virtual media install you need an iLO license, a trial license should work just fine ### Caveats and Gotchyas - Make sure the iLO port is connected to a port on the switch that is on the same VLAN as the remote device attempting to connect to it. - you can let `DHCP` handle DORA and configuration and then boot from virtual media via iLO - Booting from virtual media is an option in the `F9` menu that needs to be enabled before attempting iLO boot